Projectors and Laptops Set Up Instructions.
If the colour labels have come of the leads the cable ties are the same colours except
the bright blue cable tie matches with a navy blue label.
Each bag has a coloured luggage label which matches up with everything that
belongs in the bag.
Projectors

1. Set up the projector facing the screen and lower the feet.
2. Connect VGA (blue labelled lead) and Mains Cables.
3. If sound is required plug sound lead into green labels ports.
4. Turn the projector on, a green light should now show, make sure that the slider across
   the lens is open.
5. The Epson 2 projector can be connected with the HDMI cable to the Lenova computer
   only. This can be used instead of the VGA lead.
   Computers
6. Connect Kensington presenter to Yellow USB port, if a PowerPoint presentation is
   going to be used. (The USB stick slides out of the back of the Presenter.)
7. Connect USB hub for the Toshiba laptop to enable more Flash Drives (USB sticks) to
   be used. The Lenova laptop should have enough USB ports.
8. Plug the mouse in if required to an empty USB port.
9. The Keypad has the left and right mouse buttons on it but a mouse can be connected
   at this point and is provided.
   10.Plug in the VGA cable from the projector into the to the laptop.
   11.Connect up the power lead and switch on the power.
   12.Turn on the laptop and click on the Member icon (password U3A) may be required
   when the computer is booted up.
   13.The projector should display the image on the laptop if not go to DVD instructions on
   the reverse.
   Lenova & Toshiba Laptops
   14.When the first screen is displayed type U3A in the Password window.
   15.It has been set up to look like a normal desktop. However, if one inadvertently clicks
   on the windows icon with a left click the desktop will change into the App screen.
   16.To rectify this take the cursor to the left hand corner of the screen and the windows
   icon should appear, left click on this.
   At the End of the Session
   17.Turn off projector by pressing the off button once, look at the screen, and press again
   to power down but do not unplug.
   18.Please remove any files that you have put on the computer.
   19.To log off right hand mouse click on the window icon and go to shut down.
   20.Disconnect all but power lead to the projector and place in the bag according to the
   colour luggage labels.
   21.If the light on the projector has stopped flashing or gone off disconnect from the mains.
   22.Please put the presenter and leads in the projector case according to the coloured
   labels.
   Please allow the equipment to cool off before placing in the bags.
   2 May 2019
   To Play a CD or DVD on a Computer Connected to a Projector.
10. Connect the laptop and the projector together and turn on the projector first then start
    the computer.
11. Insert the disc you want to play into the drive.
    Typically, the disc will start playing automatically.
12. The Player automatically switches to Now Playing mode.
13. If it doesn't play, or if you want to play a disc that is already inserted see below.
    Should The Disc Not Start To Play It Another Way.
14. Go to Windows Explorer (the file in the Task Bar at the bottom of the screen.)
15. Scroll down in the left hand window to find “This P.C” click on this.
16. In the new window right click on the DVD icon which should show the name of the
    DVD.
17. In the new drop down Menu select auto play now select either VLC Media Player or
    Windows Media player.
18. With VLC Media player click on Playback and then Chapter.
19. In the new window select the desired chapter number.
20. With Windows DVD Player, the DVD should start to play automatically. It may be
    required to advance the slide bar to skip introduction and then select “Play Film”.
    No Display on the Screen
    1 Simultaneously pressing the Windows Logo Key and the "P" Key on
    your laptop's keyboard will display the following window.
    2 Select Duplicate to have the laptop image appear on both your laptop
    screen and on the LCD projector.
    Or if the above does not work.
    3 Close down or minimise all open windows so that the Desktop is in
    view.
    4 Right hand mouse click on the desktop but not on any icon.
    5 In the new Window that opens click on Graphic Options.
    6 Move the mouse sideways a new window appears click on Dual
    Display or Clone Display.
    7 In the next window click on Monitor and Screen
    8 The projected screen should now be visible.
    9 Re open your files.
21. 
    To Use an IPad Connected to a Projector.
    
    1 Connect Mira Screen Cable with the projector using the HDMI cable.
    2 Turn on your projector and power up the MiraScreen Cable by
    connecting the Power port to an USB adapter (5V1A).
    3 Set your TV’s Source/Input selection to input port connected to Mira Screen Cable.
    Your Mira Screen Cable shall power on and display instructions on your TV screen.
    Switch to “Plug and Play mode” by pressing the button of MiraScreen Cable
    4 Connect Mira Screen Cable with your iOS device (via lightning data cable)
    After connecting Mira Screen Cable and your iOS device, please wait for a few
    seconds for initialization*, the screen of your iOS device will be shown on TV.
     If your iOS device popup a ‘Trust This Computer’ message, please select ‘Trust’.

• Note: Supports iOS10 and above
• Some iOS devices may popup "This accessory may not be supported". Please feel at
  ease to use as this is a normal notification.